ANSI Specified|ASME A112.6.1M-97

• Double, vertical, adjustable
• Left, right or both
• Gasketed adjustable faceplate
• Universal floor mounted foot supports
• Adjustable 8-in tapered thread ABS nipple with integral test cap, neoprene bowl gasket, hardware, threaded rod protectors, polished chrome plated finishing cap nuts and rear anchor tie down support

MIFAB® MC-13D Series double, vertical, adjustable water closet carrier with lacquered cast iron fitting, 4 in side inlets, 4 in no-hub waste, 2 in no-hub vent connection, lacquered cast iron gasketed adjustable faceplates, universal floor-mounted cast iron foot supports, adjustable 8 in tapered thread ABS nipples with integral test caps, neoprene bowl gaskets, hardware, threaded rod protectors and polished chrome-plated finishing cap nuts. Used when one or two side inlets and through the slab pipe connection is required. Typical for water closets installed on a common stack to receive waste from the horizontal piping of MC-10 horizontal fittings or to receive waste from other plumbing fixtures with waste lines roughed in above the floor slab. Adjustable fitting and faceplate design permits installer to set the water closet to the desired height from the finished floor, relative to the position of the vertical carrier fitting within the stack system and the position of the horizontal waste piping from the horizontal carriers within the battery system. Typical for off the floor plumbing fixtures that are wall-mounted and have no contact with the finished floor. The closet carrier is completely concealed within the wall and supports the load of the fixture through a faceplate and foot support system that is anchored to the floor.