• Safe to use as it creates no dust and chips fall where they are cut; chips are not blown far into pipe Only 6"-8" clearance needed to turn cutter around pipe Cuts out-of-round pipe because of spring loaded nuts If the job requires a bevel on PE, add REED bevel blade PLAS4B to simultaneously cut and bevel Durable yet economical tool for use on main lines or smaller transmission lines to cut for a tie-in or pipe break and then get the line back in use

PLAS In-Line Rotary Cutters are excellent for cutting PVC or PE pipe in trench or above ground. Each PLAS rotary cutter needs just 6 to 8 (153 - 203 mm) clearance around the pipe, making them easy to operate in trench and with lower prep costs. Outboard rollers keep the cutter aligned on pipe, ensuring a square cut every time. Each PLAS cutter also can produce, in-line with the cut, a 15deg bevel on both sides of the pipe using bevel blade PLAS4B*. For cutting PVC pipe, the long-lasting carbide-tipped blades penetrate up to a 2 wall thickness. For cutting PE pipe**, REED developed a hardened, tool steel blade for best cutting results. The engineered blade tip drives chips out of the way while cutting PE. PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternate PLAS In-Line Rotary Pipe Cutter Blades. *Bevel blade PLAS4B included with PVC models 04470, 04475, 04480 and 04485; can also be added to PE models. Contact REED for details.**PLAS Cutter Specific Limitations for PE:up to 14 pipe (355 mm) - 2 (51 mm) wall thicknessup to 18 pipe (500 mm) - 1 1/2 (38 mm) wall thicknessup to 28 pipe (800 mm) - 1 (25.4 mm) wall thickness .