ANSI Z21.10.3|ASHRAE 90.1|ASME HLW|CEC Compliant|CSA Certified|NSF Certified

• BMS integration Protective powered anodes Vitraglas® tank lining with Microban® Three pass fire tube heat exchanger system Temperature and pressure relief valve installed

All gas water heaters are certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa). All models design certified by CSA international (formerly AGA/CGA) to ANSI Z-21.10.3, for up to 180 deg F (82 deg C) application as an automatic storage heater. As an automatic storage heater, all models are complete, self-contained water heating systems. It needs no separate storage tank, pump, wiring (115 VAC required) or elaborate piping network. When equipped with a mixing valve, it will supply 180 deg F (82 deg C) sanitizing and lower temperature general purpose hot water simultaneously. These models can be used either as a single unit or in multiples connected in series or parallel (recommended).